Saving You Time and Money   

Many authors, when they sit down to write an article or book, do not think of things they can do (or not do) that can greatly affect the costs of editing—both in time and money. Here is a compilation of things I have found over the years that ultimately streamlines the editing process. Anything that streamlines that process saves you—the author—money and time, which is essential, especially with seminal work that needs to get published as soon as possible.


It is good practice when more than one author is writing an article, book, etc., (I use “book” and “manuscript" here more or less interchangeably) to make sure all authors have each others’ contact information—including email addresses and cell phone numbers—in case of emergency. If that is not possible for whatever reason, at a minimum, the prime author should have this information.

The prime author should also have a list of any dates when coauthors will not be available for questions or reviews, such as during vacations or travel, so it is important that all coauthors are forthcoming with this information.


If you have a deadline, you need to tell your editor this prior to signing any contracts. Your deadline can greatly affect the amount you pay—the less time your editor has to do the job, the more money you can expect to pay. You didn’t write your book in three days, so you can’t expect your editor to edit it in three days either. If you do expect this, rush charges will be incurred in most cases.


If you have used highlighting or shading in the text to mean something has to be investigated or cleared up prior to publication, please have all matters dealt with prior to submitting the manuscript for editing and delete the shading.

If you are using Microsoft Word to prepare your manuscript, use Word's predefined Heading styles (Heading 1, Heading 2, etc.) and be consistent with their use, especially if more than one author is contributing to the book and if the book will be professionally typeset.

Be consistent with the styles used throughout the book—no matter how many individual files make it up. This is very important when two or more authors are contributing to the book and if the editor is responsible for making the files cohesive and consistent. The more styles used, the more complex the editing process is, which means added costs.

NOTE: Only save your Word files in the .docx file format and NOT .doc. The .doc format is outdated and cannot be read by the newer versions of Word. If you do save it as .doc, it will greatly limit the number of editors who can work on your project.


Differences in styles used also extend to the References (a.k.a. Literature Cited) section. The book's prime author or the book's editor (if it is a compilation of chapters) needs to determine the reference style in advance and tell the coauthors what style to use for their reference sections. Formatting reference sections for style is time-consuming work, so the less work the editor has to do to get the chapters internally consistent means less time for editing and less money you need to spend.

Verify just prior to writing which reference style the publisher uses and follow that. Make sure that you have all information in each reference cited (e.g., all authors listed, title(s), publisher, city, state, country of the publisher, year of publication, page numbers if needed/required). All authors of a reference should be listed. Different publishers have different requirements for how many they list. It is much easier for an editor to remove names than have to chase them down. (This adds time, which adds cost to authors.)

Publishers sometimes change which reference style they follow; something you saw two years ago from a given publisher may not be the style they follow now.

Many authors often use the reference style they are most familiar with and either do not know—or disregard—a publisher’s preferences. Doing this adds more time and/or expense to the publication process to get the references publication quality.

Do not use “ibid” or “et al.” in reference lists. Yes, these are great shorthand methods, but different publishers have different requirements for this (some use three, some use seven, some use all of the authors’ names), so it is better to have the complete list. Also, if during the editing process the original reference (i.e., the one above the “ibid” citation) has to be removed, then getting subsequent ibid citations will be a problem, especially if automated citation software (like EndNote) was used.

Although EndNote and similar software is handy when writing a book, it does not work seamlessly with all layout (typesetting) software. If you use this Word plugin, convert the document to plain text prior to it being submitted for editing. If this is not done, extra review cycles (i.e., extra time) will be needed for reviewing the files in the proof stage.

Manuscripts often take many months or years to write. Because of this, the status of references cited often change. If something was cited that was not published and the status was given as “submitted”, first check if this status is ok to use with a given publisher. Many publishers only want cited references that have been “accepted” or are “in print”. If you have any these types of statuses in your References list, check to see if the status has changed since you wrote it. If it has, make sure you have the new status (and any additional information) reflected in the text.

Verify there is a citation in the chapter/book for all references in the References section and vice versa.

If a reference has to be given in the Front Matter (Preface, Foreword, etc.), or the Abstract, use an inline citation or footnote. Do not cite references with reference numbers (if that is the style used). Numbered citations should always start in Chapter 1.


Header numbers are used to organize text and to make it easier for readers to navigate a book. If you are writing a multiauthor book, use the same header styles throughout in each chapter. Here is an example:

Chapter 1

1.1                   (first level header)

1.1.1                (second level header)             (third level header) 


Because PowerPoint is a presentation package—not an illustration package—figures created in PowerPoint need special handling and saving to get them to be publication quality. The “dots per inch” needed for a figure to look good on the printed page is 300 dpi. PowerPoint only produces a 72 dpi figure without special saving procedures.

It does not matter how good the figure looks on screen. This has nothing to do with how it will look on a professionally printed page—which is often printed at 600 dpi.

If figure part labels (A, B, C, etc.) are imbedded in the figure itself, verify that there is enough contrast between the background color and the letter color, and that they show up (e.g., a yellow or light gray background with a white letter on top is not acceptable to most publishers).

Figure Captions and Table Titles

Captions should be written in such a way that readers can understand what it is without other text. A common example of this is describing what various colors mean in the text itself, but the color meanings are not repeated in the caption. Figures are often on another page from where they are cited, so they should be somewhat self-explanatory.

If a figure (drawing, photo, etc.) was obtained from another source, photo or other credit must be given, e.g., “Photo courtesy of XYZ Company” or “Drawing courtesy of XYZ Company”. Be consistent with how the credit line reads if at all possible.Some publichsers require the city, state/cocuntry of a company if you got the figure from them, e.g., “Photo courtesy of XYZ Company, Chicago, IL”. 

All figures and tables must be cited in the text in the order they appear.


If you are using material from other sources—even if that source is the same you are writing for—you must obtain permission in writing from the source to use their material. Materials can include tables, photos, drawings, charts, etc. It is an infringement of copyright law not to do this.

Getting permission from individual authors to use their work is nice, but it does not exempt you from getting written permission from the publisher of that source if the publisher is the one who owns the copyright.

Even if you are reusing a figure from your own work, you still need to have the publisher’s permission to use it if they own the copyright to that work. 


The manuscript you submit to me should be as close to finished, i.e., perfect (as far as you are concerned) as possible. The more work you put into the details prior to submitting it, the more time and money you save in getting your manuscript ready for submission.

Anything that can be done to alleviate errors and/or inconsistencies prior to editing will cut down on time and costs.

If more than one author is writing a book (unless each chapter is standalone and does not reference other chapters, as in a conference anthology), it is strongly advised that all authors read the book from cover to cover before it is sent to me for editing. Coauthors will catch errors and inconsistencies that you (the original author) will not. They will often add different perspectives to the narrative that could make the writing better or more correcrt.

If you are the only author, you are also strongly advised to read the book from cover to cover prior to submitting it to me. Most books are written either out of chapter order or over the course of many months or years, so errors and/or inconsistencies creep in during the writing process. Catching these errors before the book is edited saves time and money. If you are the only author, try to get a peer to review the book for a learned critique. If no peers are available for this, try to get a knowledgeable layperson to read it.

In addition to the time-honored method for finding errors of putting the book down for a few days, here’s another tip I found that works even better. Changing the font, font size, and/or number of columns prior to the cover-to-cover read will instantly help you spot errors. (Example: If you have your text set at 12 pt Times Roman in one column with 1″ margins, try 10 pt Helvetica with .75” margins in two columns). Your brain looks at this as completely new material so the mistakes become very evident.

If you cannot do all these, do not despair! I am a full service editor and will be happy to get your manuscript up to the highest standards of English language editing!


©20122020 ERF Editorial Consulting.  All rights reserved.